Was Du über Traktorreifen wissen musst!

What you need to know about tractor tires!

6 Important Things You Should Know About Your Tractor Tires

Tractor tires are a crucial factor for traction, driving comfort, soil protection, and the safe operation of agricultural machinery. Anyone looking to buy tractor tires or taking over a tractor with existing tires should be aware of some important points. The correct tire size, construction, load capacity, and appropriate tire pressure directly influence the performance and lifespan of the tires.

1. Size and Brand of Tractor Tires

When selecting new tractor tires, tire size, load capacity, and application area must match the tractor. Depending on the axle and drive, different specifications from the vehicle manufacturer apply.

Pay Attention to Proper Coordination

Especially with all-wheel drive tractors, correct coordination between front and rear tires is essential. Different rolling circumferences can unnecessarily strain the drivetrain. Therefore, when changing tires, the technical specifications of the tractor manufacturer should be taken into account.

Anyone looking to buy tractor tires cheaply should therefore not only focus on the price. The correct dimensions and a tire tread suitable for the application are crucial.

2. Bias-Ply Tires for Tractors

For older tractors and certain agricultural machinery, bias-ply tires are still used. In this construction, the carcass plies run diagonally across the tire.

Advantages of Bias-Ply Tractor Tires

Bias-ply tires are characterized by a relatively stable sidewall and a robust construction. This can offer advantages, for example, when working with a front loader. Compared to modern radial tires, however, the driving behavior on the road is often less comfortable.

Do not combine bias-ply and radial tires arbitrarily

Bias-ply and radial tires should not be combined without observing the manufacturer's specifications. Especially on the same axle, different constructions should be avoided.

3. Radial Tires for Modern Tractors

Radial tires are now the preferred tires for many modern tractors. Their construction allows for a flexible sidewall and a larger contact patch.

Advantages of Modern Radial Tires

As a result, radial tractor tires can combine good traction in the field with precise handling on the road. Especially at higher speeds, they offer advantages in terms of driving comfort, stability, and ground contact.

Suitable for field work and road driving

For agricultural businesses that frequently switch between field work and road driving, modern radial tires can therefore be a particularly interesting solution.

4. Observe the Load Capacity of Tractor Tires

An important point when buying tractor tires is their load capacity. Each tire has a defined load limit, which depends on tire pressure, speed, and operating conditions.

Consider Load from Attachments

Especially when working with heavy attachments, trailers, or front loaders, the load on the tires can increase significantly. Therefore, the permissible values from the tire and tractor manufacturer should be observed.

IF and VF Tractor Tires

Modern IF and VF tractor tires have also been developed to allow higher loads or lower tire pressures under suitable operating conditions. However, the actually permissible values always depend on tire size, manufacturer, speed, and load.

5. The Correct Tire Pressure

The tire pressure in tractor tires influences traction, ground pressure, tire wear, and driving behavior. Too high or too low air pressure can negatively affect the properties of the tire.

Adjust Tire Pressure to the Application

Especially under changing operating conditions, tire pressure should be checked and adjusted according to the actual load. Different settings may be useful for field work than for road driving.

Tire Pressure for IF and VF Tires

For IF and VF tires, greater possibilities are available depending on the tire model. Nevertheless, the tire pressure should always be chosen based on the tire manufacturer's specifications and the actual axle load.

6. Regularly Check Condition and Tread Depth

Even high-quality agricultural tires require regular inspection. In addition to air pressure, tires should be checked for cracks, damage, foreign objects, uneven wear, and sufficient tread depth.

Check Tread Depth and Wear

A good tire tread is particularly important in difficult soil conditions. If the tread is heavily worn, traction and power transmission can decrease. Timely inspection also helps to plan the next purchase of tractor tires early.

Buy Tractor Tires Online at Interpneu AG

Anyone looking to buy tractor tires will find a large selection of various brands, dimensions, and tire types for agricultural machinery at Interpneu AG. As a Swiss online provider, Interpneu AG offers suitable solutions for different tractors and application areas.

Large Selection of Agricultural Tires

Whether radial tires, bias-ply tires, IF tires, or VF tires – when making a selection, not only price and brand, but above all tire size, load capacity, application area, and permissible tire pressure should be considered.

Find the Right Tractor Tires Online

With the right tires, the potential of a tractor can be better exploited. At the same time, traction, soil protection, driving comfort, and the lifespan of the tractor tires can be optimized.

Back to blog